Description of Standard Eagle AAA

Eagle AAA alloy is a soft magnetic alloy containing approximately 80 % nickel, 4.20 % molybdenum, and 15 % iron which develops extremely high permeabilities with minimum hysteresis loss. The material is provided with the correct temper to permit users to perform a variety of cold forming operations. It can be fabricated into shields by roll forming, spinning, deep drawing, hydroforming and other conventional sheet metal operations. Where joining is required, spot welding or tungsten inert gas welding can be used.

Magnetic Properties of Standard Eagle AAA

Eagle AAA is capable of displaying a minimum DC permeability of 60,000 at a flux density of 40 gausses when heat treated.

Typical DC Permeability Range:

60 Hz Impedance Permeability (µz) vs. Flux Density

E-I Sine Test Method, ring specimens. Heat treated- H2 2150° F (1177° C) for 4 hrs., cooled at a rate of 600° F (333° C) per hr.

For additional information about ordering Eagle AAA Ultimate Annealed™ sheet stock, or to find out about other Eagle products, call us today

Size Specifications for Eagle AAA Ultimate Annealed™ Sheet Stock  

    Key Benefits:

• Excellent flatness 
• High permeability
• Corrosion resistance
• Easy forming
• Easy welding

 * 119"  x specified width, actual material yield due to .50 holes on one end. 

** 24” Widths are also available by special order.

    Other Special Sizes available upon Request

Foil Stock

Size Specifications for Eagle AAA Foil

Other Special Sizes available upon Request

Enhanced Foil Stock*

Size Specifications for Enhanced Eagle AAA Foil

* Eagle's propriety annealing procedure enhances foil properties by up to 40 %.